Company pitches outboard powered by propane - Trade Only Today

Company pitches outboard powered by propane

Author:
Publish date:
Social count:
0

Los Angeles-based Lehr hopes the idea catches on among consumers who use the gas in other devices

34_outboard_01

What started as an idea on a research vessel in the North Sea several years ago soon could be coming to a dinghy or tender near you: the propane-powered outboard. It’s an attempt by Lehr Inc., of Los Angeles, to boost affordable sustainable propulsion technology for a mass market, based on the belief that the world will eventually shift to gaseous fuels.

Propane already is used in buses, cabs, forklifts, gardening equipment, Go Karts and small scooters, so why not try it in small outboards? “There are many upsides to propane-powered propulsion,” says Bernardo Herzer, a licensed captain and the CEO of Lehr, which has introduced a 2.5- and a 5-hp outboard (www.golehr.com). The gas is clean, relatively cheap and readily available, and it’s not imported from politically volatile regions.

As a captain of a research ship, Herzer grew irritated by the noise and fumes from combustion engines on board, so he explored the possibility of using clean-burning and odor-free propane as a fuel source. After all, he thought, if it works on the galley stove, it might work for propulsion, too. “It helps the U.S. and the environment,” he says.

Although propane is cleaner than gasoline or diesel, it isn’t zero-emission or a renewable source of energy. For example, as a byproduct of oil extraction in Prudhoe Bay, Alaska, propane needs to be separated from crude in large gas plants before it gets pumped back into the ground, where it pressurizes oil reservoirs or acts as a solvent that separates oil from rock. Some of it is also used as a refrigerant, and the rest is sold for heating and propulsion purposes. At a time when the price of heating oil is increasing sharply, propane is attracting considerable political and economic interest.

Cleaner and more efficient

35_outboard_03

To make the case for propane as a cleaner fuel alternative, Lehr points to studies that analyzed water and air pollution from small marine engines and found that they emit a great deal more harmful exhaust gases than the average car, as well as discharging unburned oil into the environment.

35_outboard_02

By contrast, the company says, propane produces 25 percent less carbon dioxide and as much as 60 percent less carbon monoxide while reducing the emission of ultra-fine particulates by 97 percent. Propane also has 96 percent fewer carcinogenic emissions than gasoline and has no ozone-depleting potential.

Herzer also asserts that Lehr’s engines are more efficient than comparable gasoline-burning outboards. “This is not a conversion of an engine that was designed to burn gasoline,” he says. “It was designed and optimized to burn propane, which is rated at 110 octane, and the more octane, the higher the efficiency.”

Comparing fuel consumption of gasoline- and propane-powered outboards of equal size, Lehr estimates the potential annual savings in fuel costs to lie between $26 for a 2.5-hp engine and $1,841 for a 175-hp model. This calculation assumes an annual average engine run time of 57 hours, a gas price of $3.72 a gallon and a propane cost of $2.42 a gallon.

Less weight, less maintenance

Propane liquefies at a pressure of 80 to 120 pounds per square inch, which is much less than the 3,000 to 3,600 psi required to compress natural gas for use as an engine fuel, so propane tanks don’t have to be as massive, which significantly reduces weight. According to Lehr, a gallon can power a 5-hp outboard for as long as two hours and the 2.5-hp model for as long as four hours.

Another appealing possibility of the propane outboard is sidestepping the pesky ethanol issue. Ethanol fuel does not sit well with gasoline marine engines. To paraphrase Herzer: no ethanol, no water, no additives, no problem.

Lehr holds 37 patents and has won the EPA Clean Air Excellence Award and the Popular Mechanics Breakthrough Product Award. Since the company filed for incorporation in 2007, it has gone through several rounds of funding, including Series A Preferred Investment in 2009-10, and licensed its technology to Fiskars, a manufacturer of lawn-care equipment.

It also signed a co-branding deal with Craftsman and secured vendor agreements with Walmart, Ace Hardware, The Home Depot, True Value and Sears, among others. The outboards will be sold through Donovan Marine, Discount Marine Mart and other marine retailers, including participating West Marine stores. Suggested retail prices range from $1,200 for the 2.5-hp short shaft to $1,956 for the 5-hp long shaft. Lehr says it sources parts from around the world but builds the engines in China. Models rated at 10 hp and 25 hp are said to be on the drawing board.

36_outboard_03

‘Twist and go’

Herzer hopes propane outboards will take off because they will strike a chord with people who already use the gas in other applications. They might be fueling their backyard barbecue, their camping lanterns, their lawnmowers, leaf blowers and string trimmers with it. These devices use disposable 16.4-ounce propane canisters that are sold through outdoor equipment retailers. This so-called “twist-and-go option” is also available on the outboards, which alternatively can be connected to a remote fuel tank, such as a refillable propane bottle or Lehr’s own see-through composite tanks, via fuel line hose.

“Imagine you go out on a fishing trip with this propane outboard,” he says. “You can connect a chain of other devices, including a fishing lantern and a barbecue. You can’t do that with any other fuel.”

This article originally appeared in the March 2012 issue.

Related

OneWater Marine touts May sales

Atlanta-based OneWater Marine Holdings recognized 34 sales consultants for delivering 10 or more boats each in the month of May, contributing to a record-setting month for unit sales at the company.

Golden Boat Lifts expands

Golden Boat Lifts, a manufacturer of post, elevator and freestanding boat lifts, has expanded its manufacturing space by 7,000 square feet.